 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TPCP8303 TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOSV) TPCP8303 Lithium Ion Battery Applications Notebook PC Applications Portable Equipment Applications * * * * Low drain-source ON-resistance: RDS(ON) = 41 m (typ.) High forward transfer admittance: |Yfs| = 12 S (typ.) Low leakage current: IDSS = -10 A (max) (VDS = -20 V) Enhancement mode: Vth = -0.3 to -1.0 V (VDS = -10 V, ID = -1 mA) Unit: mm 0.330.05 0.05 M A 8 5 2.40.1 0.475 1 4 0.65 2.90.1 B A 0.05 M B (Q1, Q2 Common) Drain-source voltage Absolute Maximum Ratings (Ta = 25C) S 0.80.05 0.025 S 0.170.02 0.28 +0.1 -0.11 +0.13 Characteristic Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC Pulse (Note 1) (Note 1) Symbol VDSS VDGR VGSS ID IDP PD (1) PD (2) PD (1) PD (2) EAS IAR EAR Tch Tstg Rating -20 -20 8 -3.8 -15.2 1.48 1.23 Unit V V V A 1. Source1 2. Gate1 3. Source2 4. Gate2 5. Drain2 6. Drain2 7. Drain1 8. Drain1 1.12 -0.12 1.12 +0.13 -0.12 0.28 +0.1 -0.11 Single-device operation Drain power (Note 3a) dissipation (t = 5 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation Drain power (Note 3a) dissipation (t = 5 s) (Note 2b) Single-device value at dual operation (Note 3b) Single-pulse avalanche energy Avalanche current Repetitive avalanche energy Single-device value at dual operation (Note 2a, 3b, 5) Channel temperature Storage temperature range (Note 4) JEDEC W 2-3V1G 0.58 0.36 18.8 -3.8 0.04 150 -55 to 150 mJ A mJ C C JEITA TOSHIBA Weight: 0.017 g (typ.) Note: For Notes 1 to 6, see the next page. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). This transistor is an electrostatic-sensitive device. Handle with care. Circuit Configuration 8 7 6 5 Marking (Note 6) 8 7 6 5 8303 1 2 3 4 1 2 3 4 Lot No. 1 2010-01-14 2.80.1 TPCP8303 Thermal Characteristics Characteristic Single-device operation Thermal resistance, (Note 3a) channel to ambient (t = 5 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation Thermal resistance, (Note 3a) channel to ambient (t = 5 s) (Note 2b) Single-device value at dual operation (Note 3b) Symbol Rth (ch-a) (1) Rth (ch-a) (2) Rth (ch-a) (1) Rth (ch-a) (2) Max 84.5 C/W 101.6 215.5 C/W 347.2 Unit Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: (a) Device mounted on a glass-epoxy board (a) 25.4 (b) Device mounted on a glass-epoxy board (b) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) (a) 25.4 (b) Note 3: a) The power dissipation and thermal resistance values shown are for a single device. (During single-device operation, power is applied to one device only.) b) The power dissipation and thermal resistance values shown are for a single device. (During dual operation, power is applied to both devices evenly.). Note 4: VDD = -16 V, Tch = 25C (initial), L = 1 mH, RG = 1 , IAR = -3.8 A Note 5: Repetitive rating: pulse width limited by maximum channel temperature Note 6: on the lower left of the marking indicates Pin 1. * Weekly code (three digits): Week of manufacture (01 for the first week of the year, continuing up to 52 or 53) Year of manufacture (The last digit of the year) 2 2010-01-14 TPCP8303 Electrical Characteristics (Ta = 25C) Characteristic Gate leakage current Drain cutoff current Drain-source breakdown voltage Gate threshold voltage Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth RDS (ON) Drain-source ON-resistance RDS (ON) RDS (ON) RDS (ON) Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-on time Switching time Fall time Turn-off time Total gate charge (gate-source plus gate-drain) Gate-source charge1 Gate-drain ("Miller") charge tf toff Qg Qgs1 Qgd |Yfs| Ciss Crss Coss tr ton 4.7 VGS 0V -5V ID = -1.9 A RL = 5.3 Test Condition VGS = 8 V, VDS = 0 V VDS = -20 V, VGS = 0 V ID = -10 mA, VGS = 0 V ID = -10 mA, VGS = 8 V VDS = -10 V, ID = -1 mA VGS = -1.5 V, ID = -0.3 A VGS = -1.8 V, ID = -1.0 A VGS = -2.5 V, ID = -1.9 A VGS = -4.5 V, ID = -1.9 A VDS = -10 V, ID = -1.9 A VDS = -10 V, VGS = 0 V, f = 1 MHz Min -20 -12 -0.3 6 Typ. 85 66 52 41 12 640 100 140 12 20 43 138 10 1.6 2.1 Max 1 -10 -1.0 144 90 60 46 Unit A A V V m S pF OUT ns nC VDD -10 V Duty 1%, tw = 10 s VDD -16 V, VGS = -5 V, ID = -3.8 A Source-Drain Ratings and Characteristics (Ta = 25C) Characteristic Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol IDRP VDSF Test Condition IDR = -3.8 A, VGS = 0 V Min Typ. Max -15.2 1.2 Unit A V 3 2010-01-14 TPCP8303 ID - VDS -10 Common source Ta = 25C Pulse test -10 -3 -2.2 -2 -1.8 -2.5 -4 -6 -6 -1.6 -20 Common source Ta = 25C Pulse test -10 ID - VDS -3 -4 -6 -2.2 -2.5 (A) (A) -8 -16 ID ID -12 -2 -1.8 Drain current Drain current -4 -1.4 -8 -1.6 -4 -1.4 VGS = -1.2V -2 VGS = -1.2 V 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 0 0 -0.4 -0.8 -1.2 -1.6 -2.0 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID - VGS -10 VDS - VGS -0.5 -8 VDS (V) Common source VDS = -10 V Pulse test -0.4 Common source Ta = 25C Pulse test ID (A) -6 -4 100 -2 25 Ta = -55C Drain-source voltage -0.3 Drain current -0.2 -0.1 -1 -0.3 0 ID = -1.9 A 0 0 -0.4 -0.8 -1.2 -1.6 -2.0 0 -2 -4 -6 -8 Gate-source voltage VGS (V) Gate-source voltage VGS (V) |Yfs| - ID 100 Common source VDS = -10 V Pulse test 1000 Common source Ta = 25C Pulse test RDS (ON) - ID Forward transfer admittance |Yfs| (S) Ta = -55C 100 25 10 Drain-source ON-resistance RDS (ON) (m) 100 VGS = -1.5 V -1.8 -2.5 -4.5 1 0.1 -0.1 -1 -10 -100 10 -0.1 -1 -10 -100 Drain current ID (A) Drain current ID (A) 4 2010-01-14 TPCP8303 RDS (ON) - Ta 120 IDR - VDS -100 Drain-source ON-resistance RDS (ON) (m) 100 -1.9, -3.8 80 VGS = -1.5 V 60 -1.8 40 -2.5 ID = -0.3 A (A) Common source Pulse test -2.5 -4.5 -10 -1 -1.8 -1.5 -1 Drain reverse current IDR VGS = 0 V -1 ID = -0.38, -1.9, -3.8, -7.6 A -4.5 20 Common source Ta = 25C Pulse test -0.1 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 0 -80 -40 0 40 80 120 160 Ambient temperature Ta (C) Drain-source voltage VDS (V) Capacitance - VDS 10000 Vth - Ta -0.8 (pF) Vth (V) Gate threshold voltage Common source Ta = 25C VGS = 0 V f = 1 MHz -0.6 1000 Ciss C Capacitance -0.4 100 Coss Crss -0.2 10 -0.1 Common source VDS = -10 V ID = -1mA Pulse test -40 0 40 80 120 160 -1 -10 -100 0 -80 Drain-source voltage VDS (V) Ambient temperature Ta (C) PD - Ta 2 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) t=5s Dynamic input/output characteristics -20 -10 (W) VDS (V) -16 VDS VGS -8 PD 1.5 (1) (2) Drain power dissipation Drain-source voltage 1 -4 -8 VDD = -16 V -4 Common source ID = -3.8 A -2 Ta = 25C Pulse test 0 0.5 (3) (4) -4 0 0 40 80 120 160 200 0 0 4 8 12 16 20 Ambient temperature Ta (C) Total gate charge Qg (nC) 5 2010-01-14 Gate-source voltage -12 -8 -6 VGS (V) TPCP8303 rth - tw 1000 Single pulse (4) (3) (2) 100 (1) Transient thermal impedance rth (C/W) 10 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) 1 0.001 0.01 0.1 1 10 100 1000 Pulse width tw (s) Safe operating area -100 (A) ID max (Pulse) * -10 t = 1 ms * Drain current ID 10 ms * -1 * Single pulse Ta = 25C Curves must be derated linearly with increase in temperature. -1 -10 VDSS max -100 -0.1 -0.1 Drain-source voltage VDS (V) 6 2010-01-14 TPCP8303 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2010-01-14 |
Price & Availability of TPCP8303
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |